1. Keep the numbers painted at the end of the runway just
  visible through over the nose of the airplane.

 2. Reduce engine power further, gently pull back on the stick
  to "flare" the aircraft.

 3. Reduce power to the engine to cut airspeed to 1.3 X stall
  speed. Align the airplane's flight path with the runway
  centerline.

 4 Use the wheel brakes and rudder to steer the plane to its
  stopping point.

 5. Deploy the plane's flaps. Lower the landing gear.

 6.Continue to use back pressure on the control wheel to
  keep the nose up. Fly just a few inches above the
 runway's surface until it loses flying speed and the main
  wheels "bump" on the tarmac.

First Step

Final Step

Submit